Brady BP-PR PLUS Series Instrukcje Operacyjne Pobierz pdf (Strona 31)

BP-PR PLUS series

Cleaning and basic maintenance

Edition 7/06 Operating Instructions 31

Fig. 18: Removing and installing the printhead

Removing the printhead

1. Turn lever (10) counterclockwise to lift the printhead.

2. Remove labels and transfer ribbon from the printer.

3. Remove hexagonal wrench (9) from its retainer.

4. Lightly keep printhead mounting bracket (9) on the print roller with one finger and screw out screw (8)

with the hexagonal wrench and remove it and the washer.

5. Swivel printhead mounting bracket (9) upward.

6. Remove printhead from the printhead mounting bracket (9) if necessary.

7. Loosen both plug connections (2, 3) on the printhead and set printhead down on a clean, soft surface.

Installing the printhead

1. Attach plug connections (2, 3).

2. Position printhead in printhead mounting bracket (9) in such a way that the pins (6) are secured in

the corresponding holes in the printhead mounting bracket (9).

3. Lightly keep printhead mounting bracket (9) on the print roller with one finger and check for correct

positioning of the printhead mounting bracket (9).

4. Screw in screw (8) with washer with the hexagonal wrench and tighten it.

5. Reload labels and transfer ribbon (see ”6.1” on page 16).

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 39 40

Brak uwag

Brady BP-PR PLUS Series Instrukcje Operacyjne Strona 31