Brady BP-PR PLUS Series Instrukcje Operacyjne Pobierz pdf (Strona 21)

BP-PR PLUS series

Loading media

Edition 7/06 Operating Instructions 21

6.1.7 Setting the head locking system

The printhead is pushed on via two plungers. The location of the outer plunger must be set to the width

of the label medium used so as to

• achieve even print quality across the entire label width

• prevent wrinkles in the feed path of the transfer ribbon

• prevent premature wearing of the print roller and printhead.

Fig. 9: Setting the head locking system

1. Turn lever (3) clockwise to lock the printhead.

2. Loosen threaded pin (1) at outer plunger (2) with hexagonal wrench.

3. Position outer plunger (2) above the outer label edge and tighten threaded pin (1).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Brak uwag

Brady BP-PR PLUS Series Instrukcje Operacyjne Strona 21